Saturday, May 11, 2013

Clean up the jacuzzi tub


 You need to:

- Water pump.
- Hose.
- Cleaning tool refinery.
- A large bucket.
- Gloves.
- A special powder to clean the bathtub.
- Hot water.
- Towels.





Cleaning method:

1 - Before starting work, Cut off the power supply from tub.

2 - Empty the tub from water, by the pump and put them in the deepest point from the tub.

3 - Put the hose in a properly place away from the plant or flowers. If the your pump work on electricity, turn it on with great caution, and make sure to be your hands dry, then place the electrical link away from the the tub and the water source.

4 - When the tub empty of water, you will notice that there is little water remaining in the bottom of the the tub. So, Take rubbing  Gloves and  the bathtub clean  powder with hot water and go in the the tub.

5 - Work on each part separately: Start with the distribution of the powder inside the tub, including the walls, and rub. But, make sure to not be severe glove surface roughness, in order to avoid so as not to damage the inner layer the tub.

6 - Be careful also to the refinery, as it attracts a lot of dirt.

7 - When you're rubbing, thoroughly wash inside the the tub by a water hose, and the re-development of the pump in order to pump the remaining water from the washing and rubbing. Towels can absorb the remaining water in the bottom of the the tub.

Additional tips

-Better to remove water from the basin, with clean it once every 3 months at least.

-If you put the refinery into a bucket containing powder and water for 24 hours, and the dirt is not  removed from the refinery, it means that it is time to replace it.


No comments:

Post a Comment